Rockwell Automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter - Manual (Page 66)

66 Rockwell Automation Publication 520COM-UM004A-EN-E - November 2013
Chapter 7 Using Multi-Drive Mode
Drive 3 Control Routine
0
5
(End)
Copy File
Source
Dest
Length
Drive_Input_Image[7]
Drive_3_Feedback
1
COP
12
Copy File
Source
Dest
Length
Drive_3_Reference
Drive_Output_Image[7]
1
COP
13 Return from Subroutine
RET
Drive_Input_Image[6].0 Drive_3_Status_Ready
This section takes the data from the input area and moves it to specific tags (Logic Status bits and Feedback) for use
elsewhere in the ladder program.
This section takes the data from specific tags (Logic Command bits and Reference) and moves them to the output
image area for transmission to the master.
1
Drive_Input_Image[6].1 Drive_3_Status_Active
2
Drive_Input_Image[6].3 Drive_3_Status_Forward
3
Drive_Input_Image[6].7 Drive_3_Status_Faulted
4
Drive_Input_Image[6].8 Drive_3_Status_At_Reference
6
Drive_3_Command_Stop Drive_Output_Image[6].0
7
Drive_3_Command_Start Drive_Output_Image[6].1
8
Drive_3_Command_Jog Drive_Output_Image[6].2
9
Drive_3_Command_Clear_Faults Drive_Output_Image[6].3
10
Drive_3_Command_Forward Drive_Output_Image[6].4
11
Drive_3_Command_Forward Drive_Output_Image[6].5
Drive 3 Control Subroutine