Programming explicit messages, Programming explicit messages -8 – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual

Page 55

Text mode
Original mode

Programming 4-8

Publication 198-UM002A-EN-P December 2001

Programming Explicit Messages

Now that the input and output assemblies are mapped correctly, you can program explicit
messages. This manual will cover programming using RSLinx and RSLogix 500.

Before programming, you must first execute RSLinx. Once RSLinx is open configure a driver
for your system.
To configure a driver, go to

&RPPXQLFDWLRQV and select FRQILJXUH GULYHUV. The following

screen will appear:

In Available Driver Types field, select the pull down tab. A list of drivers will drop down. Select
the appropriate driver for your system and click the

$GG 1HZ button.