Chapter 2 - installation, Chapter objectives, Storage and operation – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 15: Chapter 2 — installation, Chapter objectives -1 storage and operation -1, Installation, Chapter
![background image](/manuals/577535/15/background.png)
Publication 198-UM002A-EN-P December 2001
Chapter
2
Installation
Chapter Objectives
This chapter contains information about:
•
Device storage and operating environment
•
Mounting
•
Connecting and wiring
Storage and Operation
To prolong the product life, take the following precautions:
•
Store within an ambient temperature range of –40…+85
°
C (–40…+185
°
F).
•
Store within a relative humidity range of 0…95%, non-condensing.
•
Avoid storing or operating the device where it could be exposed to a corrosive
atmosphere.
•
Protect from moisture and direct sunlight.
•
Operate at an ambient temperature range of –25…+60
°
C (–4…+140
°
F). The
Modular DSA I/O System enclosure is suitable for an ambient of –25…+40
°
C.
Modular DSA I/O System is suitable for use in an industrial environment when installed in
accordance with these instructions. Specifically, this equipment is intended for use in a clean,
dry environment (Pollution Degree 2
➊
)
➋
.
➊ Pollution Degree 2 is an environmentally where, normally, only non-conductive pollution occurs except
occasionally a temporary conductivity caused by condensation shall be expected.
➋ Pollution Degree 2 is an International Electrotechnical Commission (IEC) designations.