Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 122)

5-63 Specifications
Publication 198-UM002A-EN-P December 2001
Assembly Instances 104 and 105 are default for 198-DNG. Assembly Instances 106 and 107
are default for 198-DN.
➊ When wired as shown in the following diagrams. Typical in a Distributed Starter. Input 1 represents the
disconnect status. Input 2 represents the fault status of the 160 drive.
Table 5.34 198-IB2XOB2S-Q5 I/O Produced/Consumed Data
Input Data — Assembly Instance 103, 105, or 107
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
— — — — — — Input 2 ➊ Input 1 ➊
Input Data — Assembly Instance 101
Bit 3 or 7 Bit 2 or 6 Bit 1 or 5 Bit 0 or 4
— — Input 2 ➊ Input 1 ➊
Output Data — Assembly Instance 100
Bit 3 or 7 Bit 2 or 6 Bit 1 or 5 Bit 0 or 4
— — Run Reverse Run Forward
Output Data — Assembly Instance 102, 104, or 106
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
— — — — — — Run Reverse Run
Forward
Drive Control
Run
Reverse Run
Forward Drive
Control Run
Reverse Run
Forward Drive
Control
0 0 Stop 1 0 Run Reverse
0 1 Run Forward 1 1 Stop