Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual

Page 34

3-13 Operation

Publication 198-UM002A-EN-P December 2001

➊ Revision 4.xxx and higher includes DeviceLogix. Be sure that the last three digits of the EDS file name are at

least “400” or the EDS file will not work with a Series C MDSA.

➋ These are the catalog numbers for distributed motor starters. These three catalog numbers reported by a

198-DNG module when the “Motor Starter Type” attribute in the DeviceNet Interface object is set to a value
of 1, 2 or 3. This results in the MDSA reporting a Device Type of 22 (Motor Starter). For a complete description
of Motor Starter Type operation, refer to Appendix B

After obtaining the needed EDS file(s), do the following:

1. From the

7RROV menu, choose ('6 :L]DUG. The following screen appears:

Table 3.1 Series C MDSA EDS files

Vendor
Code

Device
Type

Product
Code

Revision ➊ Cat. No.

EDS file

4.xxx

198-DN

0001000C00430400.eds ➊

4.xxx

198-DNG

0001000C00620400.eds ➊

4.xxx

190D➋

0001001600010400.eds ➊

4.xxx

191D➋

0001001600020400.eds ➊

4.xxx

160D➋

0001001600030400.eds ➊

IMPORTANT

The EDS files listed in the table above can be obtained via the internet
at: http://www.ab.com/networks/eds. Make sure that the EDS file
revision number matches the revision code printed on the MDSA
module.