Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 161)

DeviceNet Information A-27
Publication 198-UM002A-EN-P December 2001
Instance 4 is the Predefined Group 2 Connection Set Change of State/Cyclic I/O Message
Connection. The following instance 4 attributes are supported:
Table A.47 Instance 4 Attributes
Attribute ID Access Rule Name Data Type Value
1 Get State USINT 0=nonexistant
1=configuring
3=established
4=timed out
2 Get Instance Type USINT 1=I/O Connection
3 Get Transport Class Trigger USINT 0x00 (Cyclic, unacknowledged)
0x03 (Cyclic, acknowledged)
0x10 (COS, unacknowledged)
0x13 (COS, acknowledged)
4 Get Produced Connection ID UINT 01101xxxxxx
xxxxxx=node address
5 Get Consumed Connection ID UINT 10xxxxxx101
xxxxxx=node address
6 Get Initial Comm Characteristics USINT 0x01 (acknowledged)
0x0F (unacknowledged)
7 Get Produced Connection Size UINT 0…8
8 Get Consumed Connection Size UINT 0 …8
9 Get/Set Expected Packet Rate UINT in milliseconds
12 Get Watchdog Action USINT 0=transition to timed out
1=auto delete
2=auto reset
13 Get Produced Connection Path
Length UINT 6
14 Get Produced Connection Path 20 04 24 (assy inst #) 30 03
15 Get Consumed Connection Path
Length UINT 4 (acknowledged)
0 (unacknowledged)
16 Get/Set Consumed Connection Path 20 04 24 (assy inst #) 30 03
17 Get/Set Production Inhibit Time UINT In milliseconds