Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 145)

DeviceNet Information A-11
Publication 198-UM002A-EN-P December 2001
Instance 106
This is the default output (consumed) assembly for the Cat. No. 198-DN. It was included in
the Series B MDSA as the default consumed assembly also. It is sixteen bytes long since the
back-plane of the MDSA can accommodate 16 I/O modules. It has the following format:
Instance 110
Assembly instance 110 is for use with DeviceLogix, and contains 16 consumed network bits.
It is provided for gland plate systems that want to use a standard fixed size assembly and
prefer to keep their I/O messages unfragmented, but still need to take advantage of some of
the consumed network bits in their DeviceLogix program. Assembly instance 110 has the
following format:
Table A.16 Instance 106 — Default Output Assembly Instance for Cat. No. 198-DN
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Module 1 data
1 Module 2 data
2 Module 3 data
3 Module 4 data
4 Module 5 data
5 Module 6 data
6 Module 7 data
7 Module 8 data
8 Module 9 data
9 Module 10 data
10 Module 11 data
11 Module 12 data
12 Module 13 data
13 Module 14 data
14 Module 15 data
15 Module 16 data
Table A.17 Instance 110 — Byte-wise Unfragmented DeviceLogix Output
Assembly for Cat. No. 198-DNG
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Module 1 data
1 Module 2 data
2 Module 3 data
3 Module 4 data
4 Module 5 data
5 Module 6 data
6 Consumed Network Bits 1…8
7 Consumed Network Bits 9…16