Rockwell Automation 160-DN2 160-DN2 DeviceNet Communication Module FRN 3.xx - Manual (Page 4)

Publication 0160-5.18 - June 2003
S-2 Summary of Changes
The March 1999 release of the Bulletin 160-DN2 DeviceNet
Communication Module User Manual covers the software
enhancements of Firmware Version 3.xxx and contains new and
updated information.
Bulletin 160-DN2 version 3.xxx
Software Enhancements
Features and enhancements in the 160-DN2 module that are different
than those in the 160-DN1 module include:
Compatibility with Bulletin 160 drives
(Series A, B, and C) Bulletin 160 (Series A, B, and C) drives can be connected to a
DeviceNet network.
Ability to Create Electronic Data Sheets Configuration tools, such as DeviceNet Manager, can create an
Electronic Data Sheet (EDS file) for the 160 SSC drive and 160-DN2
module.
Added Parameter Object This object describes the parameters in the 160 SSC drive and
160-DN2 module.
Added Parameter Group Object This object describes the parameter groups associated with the
160 SSC drive and 160-DN2 module.
New and Revised Chapters to
this Manual
The bulletin 160-DN2 DeviceNet Communication Module User
Manual, Publication 0160-5.18, is a new manual. It is, however,
similar to the 160 DeviceNet Communication Module User Manual,
Publication 0160-5.5. The main differences can be found in the
following chapters:
Summary of Enhancements to
User Manual
Refer to the following references in this manual:
Using This Manual Preface
Quick Start for Experienced Users Chapter 2
DeviceNet Parameter Descriptions Chapter 5
Using the 160-DN2 with DeviceNet Scanner Chapter 6
Troubleshooting Chapter 7
DeviceNet Information Appendix B
Reference Manuals Section P-2
Manual Organization P-3
DeviceNet Compatibility P-4
Replacing a 160-DN1 with a 160-DN2 P-4
Required Tools and Equipment 3-1
DeviceNet Parameter Descriptions Chapter 5
Creating EDS Files replaces Installing EDS Files 6-3
Troubleshooting Updated Chapter 7
Parameter Object B-9
Parameter Group Object B-11
Acknowledge Handler Object B-17