Rockwell Automation 825-MDN Smart Motor Manager DeviceNet Communication Card User Manual - Manual (Page 63)

Publication 825-UM002A-EN-P - December 2000
A-41
DeviceNet Interface Object Class Code 0xB4
$ VLQJOH LQVWDQFH LQVWDQFH RI WKH 'HYLFH1HW ,QWHUIDFH 2EMHFW ZLOO EH
VXSSRUWHG 7KH IROORZLQJ LQVWDQFH DWWULEXWHV ZLOO EH VXSSRUWHG
Common Services Supported:
Attribute
ID
Access
Rule
Name Data
Type Min/Max Default Description
1 Get ZeroByte USINT 0 0 Returns Zero
2 Get ZeroWord UINT 0 0 Returns Zero
7 Get/Set Assy Word 0
Parm
USINT 0…21 21 Parameter numbers whose value is used as
the first word in Input Assembly 100
8 Get/Set Assy Word 1
Parm USINT 0…21 1 Parameter numbers whose value is used as
the second word in Input Assembly 100
9 Get/Set Assy Word 2
Parm USINT 0…21 2 Parameter numbers whose value is used as
the third word in Input Assembly 100
10 Get/Set Assy Word 3
Parm USINT 0…21 3 Parameter numbers whose value is used as
the fourth word in Input Assembly 100
12 Get DN Firmware Rev UINT 0…65.535 Firmware revision in EDS viewable format
16 Get/Set OutputAssembly USINT 2, 101, 103, 104, 105 103 Output Assembly instance that is active
17 Get/Set InputAssembly USINT 50, 51, 100, 106, 107 100 Input Assembly instance that is active
18 Get/Set Program Lock BOOL 0…1 0 0=unlocked; 1=locked
19 Get/Set Set To Defaults BOOL 0…1 0 0=No action; 1=Reset
21 Get/Set Reset DN10 BOOL 0…1 0 0=No action; 1=Reset to defaults
Service Code Implemented for: Service Name
Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single