Rockwell Automation 825-MDN Smart Motor Manager DeviceNet Communication Card User Manual - Manual (Page 34)

Publication 825-UM002A-EN-P - December 2000
A-12
Instance 4 and 5 Attributes (Group 3 Message Connections)
Common Services
Attribute
ID
Access
Rule
Name Data Type Value
1 Get State USINT 0=nonexistant
1=configuring
3=established
4=timed out
2 Get Instance Type USINT 0=Explicit Message
3 Get Transport Class Trigger USINT 0x83 - Server, Transport
Class 3
4 Get Produced Connection ID UINT 11???xxxxxx
xxxxxx=source MAC ID
5 Get Consumed Connection ID UINT 11???xxxxxx
xxxxxx=source MAC ID
6 Get Initial Comm Characteristics USINT 0x21
7 Get Produced Connection Size UINT 0xFF
8 Get Consumed Connection Size UINT 0xFF
9 Get/Set Expected Packet Rate UINT Set by Master (2500)
12 Get Watchdog Action USINT 01
13 Get Produced Connection Path
Length UINT # of bytes in produced
connection path (00)
14 Get Produced Connection Path Empty
15 Get Consumed Connection Path
Length UINT # of bytes in consumed
connection path (00)
16 Get Consumed Connection Path Empty
Service Code Implemented for: Service Name
Class Instance
0x05 No Yes Reset
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
0x09 Yes Yes Delete
0x0D No Yes Apply_Attributes