NTi Audio XL2 Sound Level Meter - Manual (Page 62)

62
Sound Level Meter
Set the correction value with the rotary wheel • .

The note “Manually Adjusted” is displayed at 2 .
To undo the manual setting turn the rotary wheel • to select
the parameter UNDO at 2 .
Confirm with enter • .
Reset Correction Values
You may clear all correction values back to zero
by pressing the Clear All
1 and confirm with
enter .
Display k1 and k2 during Measurement
The correction values k1 and k2 can be dis-
played in the numeric result page during the on-
going sound level measurement instead of any
other sound levels.
Wav-file Recording
A simultaneously-recorded wav-file supports
post-event reviewing of the cause of excessive
sound levels.