NTi Audio XL2 Sound Level Meter - Manual (Page 42)

42
Sound Level Meter
Select Upper/Lower RTA Parameter
Select the parameter shown to the right of the upper • LZF
value with the rotary wheel ; e.g. max.
Press enter
• .

The pop-up window PARAMETER shows up.
Select the parameter • max.
Confirm with enter • .
Follow the same instruction and select the lower RTA pa- •
rameter live.
Select Input Range
Select the lowest possible input range according to the maxi- •
mum level expected during the measurement. Wrong input
ranges are indicated by a < in front of the measurement val-
ue or a flashing OVR message in the lower menu bar.
Select the input range
• RNGE and press enter .
Turn the rotary wheel • to set the applicable input range and
confirm with enter .
The numeric result page and the real-time ana-
lyzer page use the same input range.