NTi Audio XL2 Sound Level Meter - Manual (Page 45)

45
Sound Level Meter
Reporting
A report saves the conducted measurements onto the installed
SD Card. The XL2 Supports setting the individual levels to be
stored in the report after the measurement is completed.
1
2
3
1 Add Spectra
No No RTA measurement reporting.
Leq The RTA Leq level is stored in the report.
Leq, Lmax,
Lmin The RTA Leq, Lmin, Lmax levels are stored
in the report.
All All RTA levels are stored in the report.
2 Report Values
Choose between the following result reporting:
ALL Records all available sound pressure levels
without correction values.
Selected Records a subset of up to 10 different levels,
including correction values if you require.
Select • Report Values with the rotary wheel .
Press enter • to toggle between All or Selected.
3 Selected Report Values
By setting • Selected at 2 up to 10 individual report val-
ues can be chosen. Select the first value Lxx with the
rotary wheel and press enter .

The pop-up window for level selection shows up.
Select the reporting level with the rotary wheel • and
confirm with enter .