NTi Audio XL2 Sound Level Meter - Manual (Page 201)

201
Further Information
ASD Cable
The ASD Cable allows for extended con-
nections of the NTi Audio measurement
microphones. It supports the transfer of
the electronic data sheet from the micro-
phone to the XL2 Analyzer. You may chain
up to 4x ASD Cables together in tandem.
Length = 5 meter (16 feet)
NTi Audio #: 600 000 336
Exel System Case
This compact system case provides the
professional transport protection for work
in the field. It offers space for the hand-
held instruments, cables and connectors.
NTi Audio #: 600 000 334
XL2 Mounting Adapter
This mechanical adapter piece mounts
the XL2 on a microphone stand. Adapters
for 3/8” or 5/8” stands are included.
NTi Audio #: 600 000 372
Battery Charger
The Battery Charger efficiently recharges
the spare battery whilst you are using
your XL2 Audio and Acoustic Analyzer.
One spare Li-Po battery is included with
the battery charger.
NTi Audio #: 600 000 332
I/O
Digital I/O Adapter PCB
The Digital I/O Adapter serves to control
external peripheral devices, such as indi-
cating sound levels that exceed limits on
a big external red-orange-green lamp. It
connects to the digital I/O interface.
NTi Audio #: 600 000 380
XL2 Input Keypad
The XL2 Input Keypad offers four marker
keys to trigger an event recording or cat-
egorize any noise during measurements.
Requires the optional Extended Acoustic
Pack.
NTi Audio #: 600 000 384