Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 7)

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
7
About this documentation
Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This documentation uses the following conventions to distinguish between different types of
information:
Type of information Writing Examples/notes
Spelling of numbers
Decimal separator
Point The decimal point is always used.
For example: 1234.56
Text
Version information
Blue text colour All information that applies to from a certain software
version of the drive onwards are marked accordingly in this
documentation.
Example: This function extension is available from software
version V3.0!
Program name » « »PLC Designer«...
Window italics The message window... / The Options dialog box ...
Variable names Setting bEnable to TRUE...
Control element bold The OK button ... / The Copy command ... / The Properties tab
... / The Name input field ...
Sequence of menu
commands
If several commands must be used in sequence to carry out a
function, the individual commands are separated by an
arrow: Select File  Open to...
Shortcut Use to open the online help.
If a shortcut is required for a command to be executed, a "+"
has been put between the key identifiers: With
+ ...
Hyperlink underlined Reference to further information: Hyperlink to further
information.
Icons
Page reference
( 7) Reference to further information: Page number in PDF file.
Step-by-step instructions  Step-by-step instructions are indicated by a pictograph.