Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 21)

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
21
What is the ApplicationTemplate PackML?
Elements of the ApplicationTemplate PackML
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[4-7] Defined PackML operating modes in the folder A12
• In this area, the states to be used within the single modes can be defined so that individual state
machines can be created by parameterisation (example: xDisableState…) which can be defined
in the PackML configuration.
• The transition of the single modes can also be defined in this block. The corresponding inputs
(example: xEnableModeTrans…) enable the changeover from the respective state into another
mode of the same state. The block base defines the initial mode and state. This configuration is
identical in all machine modules of the application.
4.3.6.2 Creating own modes
If required, further operating modes can be defined.

How to create a mode:
1. Enter the desired name for the additional mode in the A71_LocalSources. folder
in the ENUM L_UserModes_PackML by replacing "UserDefined", example: Replacing
UserDefined01.
2. Create an instance and set the configuration for the new mode.