1 about this documentation, About this documentation – Lenze E84DGFCC User Manual
Page 6
Communication manual 8400 motec CANopen
About this documentation
6
L
EDS84DMOTCAN EN 3.0 - 11/2011
1
About this documentation
Contents
This documentation exclusively describes the system bus (CAN) and the CANopen-specific
functions of the Inverter Drive 8400 motec.
The features of the system bus (CAN) and CANopen-specific functions for the Inverter Drive
8400 motec are described in detail.
Typical applications are explained with the help of examples.
This documentation also contains ...
the most important technical data for CAN communication;
information on the installation and commissioning of the CAN network;
information on CAN data transfer, CAN monitoring functions, communication-relevant
parameters and implemented CAN objects.
The theoretical concepts are only explained to the level of detail required to understand
the function of CAN communication with Inverter Drives 8400 motec.
Depending on the software version of the controller and of the »Engineer« software
installed, the screenshots in this documentation may vary from the »Engineer«
representation.
This documentation does not describe the software of other manufacturers. No
responsibility is taken for corresponding information given in this documentation.
Information on how to use the software can be obtained from the documents of the host
(master).
All brand names used in this documentation are trademarks of their respective owners.
Tip!
Detailed information about the system bus (CAN) can be found on the website of
the CAN user organisation CiA (CAN in Automation):
Note!
This documentation supplements the mounting instructions and the hardware
manual "Inverter Drives 8400 motec" supplied with the controller.