3 residual hazards, Residual hazards, Communication manual 8400 motec canopen – Lenze E84DGFCC User Manual
Page 13
EDS84DMOTCAN EN 3.0 - 11/2011
L
13
Communication manual 8400 motec CANopen
Safety instructions
Device and application-specific safety instructions
Only qualified personnel may work with and on Lenze drive and automation
components. In accordance with IEC 60364 and CENELEC, these are persons ...
– who are familiar with the installation, assembly, commissioning, and operation of
the product.
– who have the corresponding qualifications for their work.
– who know all regulations for the prevention of accidents, directives and laws
applicable on site and are able to apply them.
2.2
Device and application-specific safety instructions
During operation, the communication unit must be connected to the wiring unit and
the drive unit.
With external voltage supply, always use a separate power supply unit, safely
separated in accordance with EN 61800-5-1 in every control cabinet ("SELV"/"PELV").
Only use cables that correspond to the given specifications.
Specification of the bus cable
2.3
Residual hazards
Device protection
The communication unit contains electronic components that can be damaged or
destroyed by electrostatic discharge.
Documentation of "Inverter Drives 8400 motec", control system, plant/machine
All other measures prescribed in this documentation must also be implemented.
Observe the safety instructions and application notes specified in the
documentation.