13 error messages, 1 short overview of the profibus error messages, Error messages – Lenze E94AYCPM User Manual
Page 87
Lenze · E94AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 12.0 EN · 11/2012 · TD17
87
13
Error messages
13.1
Short overview of the PROFIBUS error messages
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13
Error messages
This chapter supplements the error list for the Servo Drive 9400 contained in the software manual
and in the »Engineer« online help with the error messages of the communication module.
13.1
Short overview of the PROFIBUS error messages
The following table lists all PROFIBUS error messages in numerical order of the error number.
Furthermore the preset error response and – if available – the parameters for setting the error
response are specified.
Tip!
When you click the cross-reference in the first column, you will see a detailed description
(causes and remedies) of this error message.
Software manual/online help for Servo Drive 9400
Here you can find general information on diagnostics & fault analysis and on error
messages.
Error number
Designation
Response (Lenze setting)
Adjustable in
hex
dec
13119744
Profibus: Lost connection to 9400 base device
0: No response
-
13129009
Profibus: No memory access
6: Information
-
13129010
Profibus: Read memory error
6: Information
-
13129011
Profibus: Write memory error
6: Information
-
13131792
Profibus: Restart after watchdogreset
1: Fault
-
13131793
Profibus: Internal error
1: Fault
-
13132032
Profibus: Internal error
0: No response
-
13132033
Profibus: Internal error
1: Fault
-
13132048
Profibus: Internal mapping error
4: Warning locked
-
13132831
Profibus: Invalid parameter record
1: Fault
-
13132832
Profibus: Error: Lenze setting loaded
1: Fault
-
13140272
Profibus watchdog: Monitoring time elapsed
0: No response
13140273
Profibus: Data_Exchange state exited
0: No response
13140274
Profibus watchdog: DP-V1 MSAC2 elapsed
0: No response