Terms and abbreviations used, About this documentation – Lenze 8400 protec Manual User Manual
Page 9

About this documentation
Terms and abbreviations used
l
9
EDS84DPS424 EN 5.0
1.3
Terms and abbreviations used
Axis, drive
Lenze controller combined with a motor or geared motor and other
Lenze drive components
Basic insulation
Insulation providing basic protection against hazardous shock
currents
Controller
Any frequency inverter, servo inverter, or DC speed controller
Device size
Used as generic term for a group of devices which have the same
dimensions (depth, height and width) but different power ratings.
Double insulation
Basic insulation and additional insulation
Functional insulation
Insulation ensuring perfect operation
Holding brake
See motor holding brake
Motor holding brake
The motor holding brake serves to statically hold e.g. a position during
the downtimes of a robot, travelling, synchronous, or hoist drive.
Reinforced insulation
Uniform insulation system, same protection as double insulation
Spring−applied brake
Design type of a (motor) holding brake
(electromechanically released, spring−applied operation)
Standard device
Used as generic term when actions and features are described which
are very similar or the same for different versions or device sizes, e.g.
l
mechanical installation or
l
power terminals
EMS
Electrified Monorail System, e.g. monorail overhead conveyors,
automated guided vehicle systems
Half wave (coded)
Process for transmitting control signals via contact conductor
Control bar and message bar, also with coding
Power wave
Process for transmitting control signals with mains voltage
DECA BUS
Process for transmitting control signals via rail bus
PLC
Programmable logic controller, compatible with IEC 61131
IrRC
Infrared remote control
IrDA
Infrared data interface
Cxxxxx/y
Subcode y of code Cxxxx
(e.g. C0410/3 = subcode 3 of code C0410)
Xk/y
Terminal y on terminal strip Xk (e.g. X3/28 = terminal 28 on terminal
strip X3)