Lenze 8400 protec Manual - Manual (Page 28)

Product description
Communication
Infrared remote control receiver
3
l
28 EDS84DPS424 EN 5.0
3.5.2 Infrared remote control receiver
For remote control, the devices are equipped with an infrared receiver (IrRC) (supported
from SW version 12 onwards).
The actions enabled by the infrared remote control (LDEZIRRC) are freely programmable.
For more information see the software manual and the online help for the LS_IRInterface
system block.
)
Note!
A trouble−free operation of the optical interface requires:
ƒ Clear line of sight between transmitter and receiver
– Maximum distance IrRC: ~ 5 m
– Maximum distance IrDA: ~ 1 m
– Angle of incidence: ~ 30 °
– Avoid direct solar radiation
– Environment without interfering transmitter (e.g. from adjacent stations)
ƒ Clean and scratch−free service hatch
3.5.3 Extensions in EMS version
For EMS device versions, additional interfaces are implemented for control :
ƒ Additional digital inputs and outputs
ƒ Infrared data interface (IrDA)
ƒ RS485 and/or RS422 serial interface
The type designation indicates which extensions are implemented in a device ( ¶ 23).
Overview of EMS extensions
Indicator in the
type code Connection
Digital I/O RS485 RS422 CANopen master PLC
X45, X46, X47, X48 X81, X82 X34
M12, 5−pole, A−coded M12, 8−pole, A−coded M12, 5−pole, A−coded
B
6 x DI
2 x DI/O
(X46 configurable)
2 x − þ
C 1 x 1 x þ
D − 2 x ю
ю designed
−
impossible