Lenze 8400 protec Manual - Manual (Page 170)

Diagnostics
Display of operating data, diagnostics
Drive diagnostics
10
l
170 EDS84DPS424 EN 5.0
10.1.5 Drive diagnostics
The controller measures relevant operating parameters which can be displayed using the
diagnosis terminal or the PC.
Display of the controller status on the keypad
– If the keypad at the front of the controller is connected to the
diagnostic interface X6, the area  of the LCD displays the
controller status via different symbols.
Icon Meaning Note
d Controller is switched on. à "SwitchedON" state
— Controller is enabled.
˜ Application in the controller is stopped.
™ Quick stop is active.
š Controller is inhibited. The power outputs are inhibited.
› Controller is ready to start à "ReadyToSwitchOn" state
¥ Speed controller 1 in the limitation The drive is torque−controlled.
¦ The set current limit is exceeded in motor
or generator mode
§ Pulse inhibit is active The power outputs are inhibited.
œ System fault is active
Ÿ Fault à "Fault" state
Trouble à "Trouble" state
¡ TroubleQSP à "TroubleQSP" state
¢ Warning is active à "Warning" status display