Lenze Controller-based Automation - Manual (Page 48)

5 System architecture
5.2 Online connection via the gateway function of the controller via CAN/EtherCAT
48
Lenze · Controller-based Automation · System Manual · DMS 1.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2 Online connection via the gateway function of the controller via CAN/EtherCAT
Which Engineering tool do I need?
[5-2] Example: Bus connection gateway controller via CAN
»EASY Starter« / »Engineer«
Connection via the network connection (LAN/
Ethernet) of the Engineering PC and the
controller.
• The Engineering PC receives the data of the
field level via the Ethernet connection to
the controller.
• The gateway function of the controller is
available for CAN and EtherCAT.

Note!
• The gateway function via the Controller is not available in combination with
PROFIBUS and PROFINET.
• For the Controller c300/p300, the EtherCAT communication is currently being
prepared. Thus, the gateway function is not supported (in preparation).