Lenze Controller-based Automation - Manual (Page 23)

Lenze · Controller-based Automation · System Manual · DMS 1.4 EN · 04/2014 · TD17
23
4 System components
4.1 Engineering tools
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.6 Lenze FAST
Lenze FAST (Feasibly Applicable Software Toolbox) provides standard software modules for basic
drive functions which serve to develop a modular machine control quickly and efficiently.
Lenze FAST is integrated in the »PLC Designer«. The FAST modules are autonomous and can be
exchanged easily and tested completely independently.
The Application Template
( 22) serves to assemble the single FAST modules.
Advantages
• Up to 80% of the software engineering can be covered with Lenze FAST.
• Considerably reduced development times for the basic functions
• The time saved can be invested in the further development of special machine features.
• Predefined and tested software modules that can be reused easily.
• Structured composition of the programming by means of the Application Template
• Error reduction by means of tested software

Online help of »PLC Designer«
Here, further information on the Lenze FAST modules can be found.