4system components – Lenze Controller-based Automation User Manual
Page 19
Lenze · Controller-based Automation · System Manual · DMS 1.4 EN · 04/2014 · TD17
19
4
System components
4.1
Engineering tools
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.2
»EASY Starter« (Online parameterisation and diagnostics)
Tip!
The »EASY Starter« is available free of charge in the download area ("Application
Knowledge Base") under:
»EASY Package Manager«
Another function of the »EASY Starter« installation is the »EASY Package Manager«.
The »EASY Package Manager« serves to automatically install updates of the firmware, device
descriptions and online helps in the background (via internet connection).
Tip!
The »EASY Package Manager« can be found in the Windows information area (next to the
task bar) and the in the Windows start menu under:
Programs Lenze (Windows XP)
All programs Lenze (Windows 7)
Read parameters
Parameter
read/write:
»EASY Starter« is an easy-to-use tool for service technicians. The functional
range for the commissioning and diagnostics of Lenze devices has been
optimised.
• Online parameterisation and diagnostics:
The »EASY Starter« serves to parameterise/diagnose the Lenze devices with
an active online connection.
• The following devices are supported:
• Lenze Controller 3200 C and p500 (for c300/p300 in preparation)
• Servo Inverters (e.g. i700)
• I/O system 1000
• Servo Drives 9400 HighLine
• Inverter Drives 8400 StateLine/HighLine/TopLine
• Inverter Drives 8400 motec/protec
• Servo Drives ECSxM (Motion)
• Load the application/firmware via separate buttons.