JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 65)

65
6 Configuration
6.3.3 Digital variables
64 digital variables are available (digital variable 1 to 64).
Setup dialog
Parameters
Parameter Selection/settings Description
Retain Retains the binary value in the event of power off
No Value is set to 0 after power on.
Yes Value is retained.
Signal suppress Signal to activate signal suppression
Inactive No signal suppression
Module (source of signal) Signal suppression by a signal (high
active) that must be selected in the fol-
lowing field (digital selector).
Inverting Inversion of the input signal
Normal Not inverted
Inverse Inverted
Level suppress Input signal level during active signal suppression
Inactive Low level (0)
Active High level (1)