JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 111)

111
8 Configuration – in setup program only
8.1 E-mail
Setup dialog
Parameters
NOTE!
The parameters described in this section can only be configured with the setup program.
Parameter Selection/settings Description
Send via Ethernet E-mail is sent via Ethernet (LAN).
The mail server is in a company network
and should be able to forward e-mails
via the Internet.
Modem E-mail is sent via a modem (after con-
necting to the Internet).
The mail server is on the Internet.

Chapter 6.7.1 "Modem", page 80
E-mail 1 to E-mail 5 (e-mail settings for the 5 alarm texts)
E-mail addresses The e-mail is sent to up to 3 e-mail addresses (each with max. 64 characters) at
the same time.
1 Enter first e-mail address
2 Enter second e-mail address
3 Enter third e-mail address