JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 52)

6 Configuration
52
Multichannel controller module
Controller C01ActualValue to
C04ActualValue Actual value of controller channel 1 to 4
C01Setpoint to C04Setpoint Setpoint value of controller channel 1 to 4
C01OutpLevelMon to
C04OutpLevelMon Output level (display value) of controller
module 1 to 4
Analog inputs AI01 to AI04 Measured value of analog input 1 to 4
Mathematics Math01 to Math04 Result of math function 1 to 4
HW counter HWCounter Counter reading of hardware counter
Setpoint value SP01RampValue to
SP04RampValue Ramp end value of ramp function 1 to 4
(if ramp function switched on)
or
Active setpoint value (external setpoint value +
setpoint value) of setpoint function 1 to 4
(if ramp function switched off)
Analog input module 4-channel
Analog inputs AI01 to AI04 Measured value of analog input 1 to 4
Analog input module 8-channel
Analog inputs AI01 to AI08 Measured value of analog input 1 to 4
Multifunction panel 840
System bus
analog inputs
Counter/Int 1 to Counter/Int 27 Current value of counter or integrator
Counter/Int clo 1 to
Counter/Int clo 27
Value of counter or integrator in most recent
closed measuring period
Process image Current process image Number of current process image on the dis-
play of the multifunction panel
0 = process image 1, 1 = process image 2 etc.
(-1 = no active process image)
Category Signal Description