JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 133)

133
10 Online parameters
10.1 Ethernet
These settings are required for the setup program to communicate with the central processing
unit via LAN and for the Web server function of the central processing unit.
Up to five PCs can be connected to a central processing unit at the same time.
Setup dialog
Parameters
NOTE!
An active connection between the setup program and the central processing unit is required
to configure the parameters described in this section.
Parameter Selection/settings Description
DHCP ON The central processing unit takes its IP
address from the DHCP server.
OFF The IP address of the central processing
unit must be assigned manually.
IP-address 0.0.0.0 to
223.223.223.1 to
255.255.255.255
Manual allocation of the IP address for
the central processing unit (active if
DHCP = OFF)
The IP address may need to be
requested by the responsible adminis-
trator.
Subnet mask 0.0.0.0 to
255.255.255.0 to
255.255.255.255
Manual setting of the subnet mask
(active if DHCP = OFF)
The structure of the subnet mask may
need to be requested from the adminis-
trator responsible.
Standard
gateway
0.0.0.0 to 255.255.255.255 Manual setting of the IP address of the
standard gateway (router) (active if
DHCP = OFF)
The IP address may need to be
requested from the administrator
responsible.
?
?
?
?