1 tools required, 2 user supplied parts – INFICON 3000 Micro GC Gas Analyzer Operating Manual User Manual

Page 86

5 - 12

3000 Micro GC Operating Manual

5.1.5 Installing the Pressure Reducer and Genie Filter Assembly

The Pressure Reducer and Genie Filter Assembly (G2816A) provides a pressure
reducing function and a gas-liquid separation through a Genie filter. It is not
compatible with other sample conditioners mounted on the 3000 Micro GC front
panel. See

Table 5-4

and

Figure 5-15

for G2816A kit content.

Figure 5-15 Pressure reducer and Genie filter assembly kit

5.1.5.1 Tools Required



5/16 in. open-ended wrench



7/16 in. open-ended wrench



1/4 in. open-ended wrench

5.1.5.2 User Supplied Parts



Vent tubing, if used



Fittings for vent tubing, if used



1/8 in. female national pipe thread (NPT) fitting



Sample input tubing and fittings

Table 5-4 Pressure reducer and Genie filter assembly kit contents.

Description

Quantity

Outlet tube

1 ea

Genie filter assembly

1 ea

1/4 in. male nut and ferrule set

1 ea

5/16 in. female nut and ferrule set

1 ea

Replacement membrane filters (5/pk)

1 ea

Replacement membrane
filters

Nut and ferrule sets

PN G2816A

Genie filter

Pressure reducer