INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 147)

7 - 19
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
7.7 Run a Sample
Once a method has been downloaded to 3000 Micro GC, a data acquisition run
can be performed.
1 To start the run, click Control >> Single Run. The Single Run Acquisition
window will be displayed. See
Figure 7-23 .
Figure 7-23 Single run acquisition window
2 Type a Sample ID in the first box. See Figure 7-23 .
3 The method will default to the method that is open at the time. To change the
method, click the folder icon located on the right of the Method field. Refer to
Figure 7-23 .
4 Select a path for storage of data files by clicking the folder icon located on the
right of the Data path field. See
Figure 7-23 .
5 The Data file box is used to create the filename. To automatically include
certain descriptors such as Sample ID, Method Name, and Date and Time,
click the blue arrow located to the right of the Data file
field. Select the desired
descriptors. See Figure 7-23 .
6 Type the Number of reps. See Figure 7-23 .
7 Click Start to begin the run. Data will be displayed in the chromatogram
window. See
Figure 7-23 .