INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 129)

7 - 1
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
Chapter 7
Basic EZ IQ Operation
7.1 Introduction
EZ IQ is powerful chromatography software running under the Microsoft Windows
operating system with an easy to use graphical user interface. EZ IQ supports three
languages: English, Chinese, and Japanese. This chapter describes the basic
functions of EZ IQ. For more detailed information, refer to the 074-538 EZ IQ
Operating Manual.
The procedure and screen captures in this chapter are representative of operation
using the 3000 Micro GC Enhanced Driver. For operation using the 3000 Micro GC
Classic Driver, refer to the 074-538-P1(A) EZ IQ Operating Manual.
7.2 Connecting EZ IQ with 3000 Micro GC
Before connecting EZ IQ with 3000 Micro GC, ensure:
 EZ IQ installation is completed successfully on a designated computer
 3000 Micro GC is powered up
 The EZ IQ computer and 3000 Micro GC are physically connected via
Ethernet, either through direct connection by crossover cable or through a LAN
network
NOTE: If the EZ IQ computer and 3000 Micro GC are connected via LAN
network, they should either be configured in the same IP subnet, or
properly routed through a corporate IP router.
To connect EZ IQ with 3000 Micro GC:
1 Click Start >> All Programs >> Chromatography >> EZ IQ Config.
2 The EZ IQ Configuration window will display. Click Instrument
Configuration.... See
Figure 7-1 .
Figure 7-1 EZ IQ configuration window