INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 221)

8 - 39
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
8.5.2.1 To View the Battery Status
Connect to the Portable 3000 Micro GC embedded web page by entering the
IP address in the Internet Explorer address bar (10.1.1.101 default) and select the
Status view. Refer to
section 6.2 on page 6-6 .
NOTE: When recharging the battery, the displayed battery voltage and percent of
charge do not apply.
In EZ IQ software, to display the current battery status, click Control >>
Instrument Status.
8.5.2.2 Charging the Battery
To charge the battery, plug the battery charger into an electrical outlet and then into
the Portable 3000 Micro GC back panel at the location marked 15 V (dc). The
battery will continue to charge while Portable 3000 Micro GC is operating.
When operating Portable 3000 Micro GC from the Vehicle Power Charger
(PN G2751-60530), the internal battery will charge only if the input from the
vehicle’s power adapter is >13.5 V (dc). Due to variation in vehicle manufacturing,
consult the vehicle owner's manual to ensure the vehicle can safely supply the
maximum power required by Portable 3000 Micro GC.
A new Portable 3000 Micro GC must be charged sixteen hours before use.
Portable 3000 Micro GC can be left on the charger indefinitely.