7 cleaning – HYDAC HMG 3000 User Manual
Page 70

HMG 3000
Page 70
Edition 11/2007 - V02 R01-S02
Stock no.: 669712
Sampling Rates
• Sampling rate:
0.1 ms - 1 min
• Sampling rate:
0.1 ms for a maximum of two sensors
(other sensor inputs inactive); e.g. for pressure peak measurements
The sampling rate which can be set is dependent on the active measurement channels. The
following applies:
• 0.1 ms
max. 2 analog input channels
• 0.2 ms
max. 4 analog input channels
• 0.5 ms
all 10 input channels
• 1.0 ms
for SMART sensors
Measured Value Memory
• Single recording:
up to 500,000 measured values
• Archive memory:
128 MB
(for ca. 100 individual recordings of 500,000 measured values each)
PC Link Interfaces
• USB port
• standard serial port (RS 232)
for communication and evaluation using the HYDAC HMGWIN 3000 or
CMWIN software
Dimensions and Weight
• Measurements:
246 x 174 x 58 mm
• Weight: 1,100
g
Operating and Ambient Conditions
• Operating temperature 0 – 50 °C
• Storage temperature
-20 – 60 °C
• Relative humidity:
0 – 70%
Standards with Which the HMG 3000 Complies
• EMC: EN
61000-6-1/2/3/4
• Safety: EN
61010
• Protection rating:
IP 40
Supply Voltage
• 12 – 30 V DC
7 Cleaning
The HMG 3000 must not be cleaned with aggressive agents (e.g. alcohol, screen cleaner,...).
For cleaning we recommend using a slightly damp cloth.