HYDAC HMG 3000 - Manual (Page 11)

HMG 3000 Seite 11
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
4.3 Switching the HMG 3000 On
When starting the unit up for the first time the
Welcome
start-up screen appears. Select
your language using the 5-way navigation key
(Select or checkmark your option by pressing
OK
) and set the current date and time. Select
the desired format, followed by entering the
current date and time via the keypad. Save
your entries via OK, followed by pressing
Continue
.
The following appears in the display when
starting the unit up in normal operation:
• Manufacturer
• Designation of the unit
• HMG version
• Date and time
• Battery charge status
The screen switches to measured value
display mode in a few seconds. When sensors
are connected you are shown the current
measured values in the Current Measured
Values
menu (see title bar in display). To skip
through the start-up screen more quickly and
proceed directly to the measured values
menu, press Esc or OK.
The following is listed in the measured values
screen (see screenshot): Input channel –
Designation – Value – (Measurement) Unit
The menu bar at the bottom of the screen
(function bar) displays the main menu and
next to that, on the right, the battery charge
status. The main menu contains the following
functions which you can access via the
navigation key (arrow key) plus the OK key.
Settings — for entering or referring to
setting data used for performing
measurements
Recording
— for recording a
measurement and graphically rendering
measurement data, e.g. as a curve
Note:
Generally speaking, functions
which can be selected and
executed are
blue
.
Black
means the functions
can’t be selected or executed.
Warnings are shown in
red
when incorrect entries are
made.