HYDAC HMG 3000 - Manual (Page 67)

HMG 3000 Page 67
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
After selecting a recording and the
Transfer
option, you see the following
screen:
Now you can determine whether the
selected recording is to be stored in the
HMG 3000 under the combination of
name+number, or whether you would like
to assign a new designation.
6.4.2.4 Sensor Dialog
This menu enables you to modify the
configuration of the SMART sensor.
Note that what is shown in this menu
depends on the SMART sensor
connected. For detailed information on the
possible settings, please refer to the
respective sensor documentation.
6.4.2.5 Administer Sensor
Configuration
Here you have the possibility of reading
out the current configuration of the SMART
sensor, or reading saved settings into the
SMART sensor.
You can also have a saved configuration
displayed or deleted.
Read out configuration from sensor
This menu item enables you to read out
the configuration of the SMART sensor
and transfer it to the HMG 3000. You can
accept the suggested name+number
combination, or enter another one.