HYDAC HMG 3000 - Manual (Page 61)

HMG 3000 Page 61
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
The date and Min/Max values can be hidden
so as to make tables easier to read. You can
hide and unhide
Min/Max and the Date via
OK .
You can also hide and unhide individual
channels for display in the table using the
Settings
function (a checkmark means that
the channel is displayed; hide/unhide via
OK
). You can also jump to a specific place in
the table via the date and time setting in the
column next to the beginning of the table.
Select via OK, enter the desired time using
the combination keypad, and conclude via
OK
. Table takes you back to table display.
Info
is used to view and modify comments
entered by you (make your entries using the
combination keypad). It also enables you to
display the recorded data for a
measurement. To exit the Info menu, use
Back
.
To exit the table view of a recording, use
Back
or Esc. You are now back in the
selection list of stored recordings. To exit it,
press OK or Esc.
To exit the View Recording menu, use
Cancel
or Esc.