HYDAC HMG 3000 - Manual (Page 57)

HMG 3000 Page 57
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
Display all:
Display all
causes the recording throughout
the entire recording period to be rendered
with all the measured values. This option is
used to restore the point of departure of a
recording. Display All + OK causes the
measurement throughout the entire time
period to be restored along with the
complete measurement range scaling if the
ranges had been previously limited.
Settings:
Settings
causes the measurement channels
to be shown which have been used to make
the recording. The channel rendered along
the y-axis in the measurement curve is
additionally labelled with "(Y)".
For rendering as a graph you can activate or
deactivate a channel by checking or
unchecking the box in front of it using the
arrow keys + OK
(checkmarked means that
the channel will be shown). This enables you
to specify whether all measurement
channels are to be shown, or only one or two
at a time. This feature enables you to keep
track when several measurement channels
are used (cf. example at left: "Tank" is
deactivated).
For curve rendering, there are additional
settings apart from which channels or
sensors
are to be shown (on/off), e.g.
• Upper and lower limit
• Colouring and rendering of curves and
values
• Time range