EZWatch Pro 3.1 User Manual
Page 56
56
section.
Step 2. S elect a preset position in the “S et” section for the connected
speed dome moving to the selected position when the motion
detection is triggered; please refer to the Chapter 3-2-10
Control Panel for setting the PTZ camera preset position.
Step 3. Click the ―A dd‖ button from the right side of the camera
selection box to save the settings.
Step 4. Repeat 1~3 to add one more preset position.
To set the section of ―M ove to preset position w hen stop trigger‖,
please use the sam e w ay of the “M ove to preset position w hen
triggered” section setting.
Enable TV out: While user connects a TV to the DVR cards, user can
enable this function to output a video signal to TV when the motion
detection is triggered.