EZWatch Pro 3.1 User Manual

Page 37

 Fu n ction descrip tion of th e ―S et u p video p aram eters‖ in terface:

1. Model Name Display: Display the DVR board model name.
2. Cameras Display Window: List cam eras for setting “fram e rate” and

“device enable/disable”, user can sim ply double click the m ouse left
button on selected cam era to change the setting. The num ber “0”
camera can set up all video system type (e.g. NTSC/PAL) and video
resolution. [see Camera Display Window Info below]

3. Set up surveillance software control panel: To set the video

control panel of the main program or playback program on the right
side or left side in the “surveillance server”.

4. Set up audio recording: A ccording to the D V R board m odel, the “S et

up audio recording” function m ay be different. This function is to
enable/disable each channel’s audio recording (For C P-1400AS /
CP-3404HS / CP-3408ASE / CP-3416ASE only).

5. ―O K ‖ button: To confirm the setting and exit “S et up video

param eters” interface.

6. ―C an cel‖ bu tton : To exit the “S et up video param eters” interface

without saving changing.

7. ―Set u p all‖ bu tton: To set up all cam eras’ video system type,

Fig. 3-3-3.1 Setup Video Parameter - EzSetup