1-2. eznetwork and ezmodem – EZWatch Pro 3.1 User Manual
Page 17
17
Sound card and speakers: For alarm sound effects.
Microphone: 2Vp-p output is required for audio recording.
Modem speed 33.6K or better; external modem that supports Wave files
is recommended.
CP Series DVR Board: Please be sure that the CP series DVR board has
been installed in the PC. For the CP series DVR board system
requirements and installation, please refer to the table in Appendix B
and the CP series DVR board installation guide.
There are several models for different software. It is described as below:
Software
Hardware
Witness AS Pro
CP-1400AS XP
Witness 1416/3416ASE Pro
CP-1416ASE XP/ CP-3416ASE XP
Witness 1404/3404HS Pro
CP-1404HS-T XP/ CP-3404HS XP
Witness 1160/1320RD Pro
CP-1160RD/ CP-1320RD Deluxe
2-1-2. EZNetwork and EZModem
Desktop or Notebook PC with Pentium III 500 MHz CPU or better.
Operating system: Windows 98 Second Edition, ME, 2000 or XP.
256 MB free hard drive space minimum.
Sound card and speakers are required for sound alarm/effects.
24-bit (true-color) VGA card or better.
Modem speed 33.6K or better.
1.
EZNetwork is used by TCP/IP and the EZModem is used by
modem-to-modem remote viewing.
2. The output level of microphone must be over V2p-p.
3. The modem must support Wave files; otherwise can not work when you
use “Phone call”.
4. The file size of compression image depends on resolution, compression
method, compression rate and testing environment.