EZWatch Pro 3.1 - Manual (Page 103)

103
 EzRSever Setting Description:
 Autorun EzRSever: Check to enable
the EZWatch Pro to automatically run
the EzRSever when system starts.
 (TCP/IP) Port: To set the connection
port for remote client PC connecting.
 Password: To set the connecting
password.
 Disconnect all clients button: To
disconnect all remote connection.
 OK button: To enable the EzRSever function and complete the setting.
 Exit button: To disable the EzRSever function and exit without the setting.
4-8. Two Way Communication – EzSTalk
This chapter will show how to have the real-time audio from designated locations
is simultaneously transmitted to both the control center and designated DVR
sites.
Fig 4-8.1 Fig 4-8.2