EZWatch Pro 3.1 - Manual (Page 31)

31
Step5. Click the ―Finish‖ button to
complete.
F
Fig. 2-4-3.5: Finish the installation
2-6-3. PDAView Pro Installation Procedures
To install the PDAView Pro program into a PDA or Smart Phone, please follow the
installation steps below:
 Plug your PDA or Smart Phone via USB or Com port to a PC installed
with Microsoft ActiveSync.
 Run Microsoft ActiveSync in the connected PC and make sure both
the PDA and PC are synchronized.
 Insert our CD into the CD-ROM drive of the PC and run the
Install.exe in the CD-ROM root directory.
 In the setup dialog box select PDAView Pro and click Next.
 Click Brows if you wish to specify another destination directory;
otherwise click Next and follow the rest of the instruction to
complete the installation.
The PDA must use the Pocket 2002 or 2003 and the Smart phone with
Windows Mobile 5.0 or above Operation System when you running the
PDAView program.