EUCHNER Safety Basic Monitor - Manual (Page 8)

8 Subject to reasonable modifications due to technical advances Id.-No.: 114013 Issue date: 14.11.2011 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316
Safety Basic Monitor
General Remarks
2. General Remarks
Please read this chapter carefully before working with the documentation and the
Safety Monitor.
2.1 Product information
This user manual is valid for the following Euchner GmbH devices :
2.1.1 Safety Basic Monitor
2.2 Function of this manual
This manual instructs for the safe assembly, electrical installation, addressing,
start-up as well as for the operation and for the maintenance of the Safety Moni-
tor.
This manual does not provide instructions for operating machines, on which this
module is built in. Please view the appropriate machine manual for corresponding
information.
2.3 Target group
This manual is intended for designers, developers and operators of systems that
will be safeguarded by one or more Safety Monitors. The manual is also targeted
to people integrating Safety Monitors into machinery, performing the initial start-
up, or maintaining them.
2.4 AS-i specification 3.0
The AS-i 3.0 devices already fulfil the AS-i specification 3.0.
The previous specifications (2.1 and 2.0) are supported as well.
Safety Basic Monitor
without Power Supply Decoupling Unit
SBM-11-S08
Safety Basic Monitor
with Power Supply Decoupling Unit
SBM-11-N08
Information!
Additional information concerning the technical data as well as the parameterization of
the Safety Monitor can be found at http://www.euchner.de.