EUCHNER Safety Basic Monitor - Manual (Page 13)

Subject to reasonable modifications due to technical advances Id.-No.: 114013 Issue date: 14.11.2011 EUCHNER GmbH + Co. KG 13
Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316
Safety Basic Monitor
Product Description
4.5 Front view and connections
Attention!
The power supply for the 24 V supply must also have isolation per IEC 60 742 and be
able to handle momentary power interruptions of up to 20 ms. The maximum output
voltage of the power supply must also be less than 42 V in case of a fault.
Micro USB
Micro USB interface
SET
service button // bouton service // compasse service // botón servicio
Chip Card
chip card
connection 2-channel direction
S11
2-channel safety input 1
output
S12
input
S21
S22 output
S31
2-channel safety input 2
output
S32
input
S41
S42 output
S51
2-channel safety input 3
output
S52
input
S61
S62 output
S71
2-channel safety input 4
output
S72
input
S81
S82 output
1.14
ext.out
Safe semiconductor output 1
2.14
ext.out
Safe semiconductor output 2
0V
ext.out
ground connection for semiconductor output
ASI+, ASI–
AS-i connection
AUX+, AUX–
connection to ext. 24 V
DC
S4 S3 S2 S1
S8 S7 S6 S5
O2
O1 AS-i M
SET
SM
1.14
ext. out
ASI +
0 V 1
ext. out
ASI –
2.14
ext. out
AUX+
ext. in
0 V 2
ext. out
AUX–
ext. in
S 71 S 72 S 81 S 82
S 42 S 41 S 32 S 31
S 62 S 61 S 52 S 51
S 22 S 21 S 12 S 11
CHIP CARD MICRO USB