Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 78)

Dakota Ultrasonics
74
3) Press the UP and DOWN arrow keys multiple times on the left button
wheel to scroll the highlighted value.
4) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the digit locations.
5) Repeat steps 3 & 4 until the height is correctly displayed.
6) Press the OK key to set the % SCRN HEIGHT and return to the menu
screen, or ESC to cancel entering the % SCRN HEIGHT.
Activating Draw Mode
4) Use the UP and DOWN arrow keys multiple times on the left button
wheel to scroll through the sub menu items until DRAW is highlighted.
5) Press the LEFT and RIGHT arrow keys on the right button wheel to
toggle the DRAW feature ON.
6) Proceed to the next section – Drawing the TCG curve.
Drawing the TCG