Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 60)

Dakota Ultrasonics
56
Activating & Setting the Parameters
Activate Trig Mode
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the TRIG menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys multiple times on the left button
wheel to scroll through the sub menu items until TRIG is highlighted.
3) Press the LEFT and RIGHT arrow keys on the right button wheel to
toggle the TRIG feature ON. The menu items should now become active
and adjustable, as illustrated above.
Enter Material Thickness
1) Press the UP and DOWN arrow keys multiple times on the left button
wheel until THICKNESS is highlighted, followed by pressing the LEFT
and RIGHT arrow keys on the right button wheel to scroll the value. When
the correct thickness is displayed, proceed to the next setting.
2) Alternatively, press the ENTER key to display the Digits Edit Box.