Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 57)

DFX-8 Series Ultrasonic Flaw Detectors
53
3) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the CAL menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
4) Use the UP and DOWN arrow keys multiple times on the left button
wheel to scroll through the sub menu items until MAT is highlighted.
5) Press the ENTER key to display the list of material types.
6) Press the UP and DOWN arrow keys multiple times on the left button
wheel to scroll through the material list until the appropriate material is
highlighted.
7) Press the ENTER key to select the material type and initiate the overwrite
confirmation screen.
8) Press the OK key to confirm the material selection, or ESC key to cancel
changing the material type.