Carbolite ABA 7/35B - Manual (Page 63)

63 MF60 – 1.04
An example of the log file contents is shown below:
Note: some internal wiring was disconnected to deliberately create the I/O board
communication errors.
09:40:37 Power up
09:49:10 Configuration access level set
09:50:44 Save recipe: overwriting existing recipe CARBOLITE1
09:51:02 Tare balance command
09:56:03 New weights entered:
09:56:03 Tray Weight = 214.3
09:56:03 Combined Weight = 272.9
09:56:03 Sample Weight = 58.6
09:57:48 Tare balance command
09:58:43 New weights entered:
09:58:43 Tray Weight = 214.3
09:58:43 Combined Weight = 279.1
09:58:43 Sample Weight = 64.8
10:46:23 Error communicating with I/O Board. Code: 2
10:46:36 Error communicating with I/O Board. Code: 3
10:46:50 Error communicating with I/O Board. Code: 3
10:47:02 Error communicating with I/O Board. Code: 3
10:47:46 Power up
10:48:21 Error initialising I/O Board comms. Code: 11
10:48:23 PIC comms error
10:49:27 Power up
11:29:28 Configuration access level set
11:30:00 Overwriting existing recipe CARBO3 with CARBOLITE1
11:30:08 Deleted recipe: CARBO3
11:30:57 Save recipe: overwriting existing recipe CARBO4
11:32:15 Copying recipe CARBO4 to new recipe TT768
11:35:37 Save recipe: overwriting existing recipe TEST135
11:36:15 Voltage setting changed to 230 V / 400 V
11:45:33 Calibrate balance command
11:52:32 Cancel calibrate command