Carbolite ABA 7/35B - Manual (Page 38)

38 MF60 – 1.04
12 Printer Settings
The printer settings screen, ref. Screen-view 12.1.1, is accessed via:
Home Screen → Main Menu → System Configuration → Print Settings
If the printer is not powered or disconnected from the controller (internal wiring) then the Printer
Ready LED will be coloured red, otherwise this LED will be green.
Pressing the ‘Printer Test’ button causes the current date, time, temperatures and weight to be
printed in English.
The ‘English’ and ‘Current Selected Language’ option allows the printer to be set to print in
English if a ‘local’ language has been selected for the screen display. This is useful because the
printer does not currently support Cyrillic and Kanji fonts.
Note: if the screen language is set to English and the printer is set to ‘Current selected
language’, then printouts will be in English.
The Print Period setting controls the time interval between printouts during a test and can be
configured to be from 30 to 300 seconds. If a recipe Print
Format is configured as ‘Full’, as
shown in Screen-view 12.1.2, then the following information will be printed at the configured
time interval:

Date and time

Recipe name

Elapsed time since the start of the test (hh:mm:ss)

Main Chamber temperature

Sample weight

Total weight loss

Total percentage weight loss
If the recipe Print Format is configured as
‘Final Result’ then only the test start information and
final test report will be printed.